Lytag Concrete Aggregate. Specially graded honeycomb Lytag® aggregate offered for use as a coarse aggregate in the manufacture of lightweight concrete.
Price shown for 1 tonne big bag (Approx 1.4m3) includes VAT and delivery. Price equivalent to £144 per m
3
Granule Size: Approx. 4-14mm.
Density: LYTAG
® is a lightweight aggregate with a bulk density at point of supply of approximately 810 kg/m
3. (ie volume for volume Lytag
® Concrete Aggregate is approximately half the weight of "normal" limestone or gravel aggregate).
Moisture Content: As supplied 4-14mm LYTAG
® is likely to contain a natural moisture content of approximately 15% by weight.
Description:
Lytag® is a sintered lightweight honeycomb aggregate that is resistant to frost and chemicals, and will not break down in water. It is also non combustible and has excellent sound and thermal insulation properties.
This specially graded Lytag® aggregate contains a minimum of "fines", and is offered for use as a coarse aggregate in the manufacture of lightweight concrete.
Lytag Lightweight Concrete Design:
The design and production of concrete is complex, involving specific data on the properties of the fine aggregate (sand), coarse aggregate (in this instance a lightweight coarse aggregate) and mix design to meet specific structural requirements. For full details of mix designs including reference to appropriate British Standards see Lytag Technical Manual Sections 3 to 5.
The following advice is offered in good faith to produce a "general purpose" non structural concrete. The mix is based on 4-14mm Lytag® , natural sharp sand and cement (OPC) sourced separately from a local builders merchant.
One tonne bulk bag of 4-14mm Lytag® Lightweight aggregate when mixed with one tone of sharp sand and 0.5 tonne of cement will produce approximately 1.6m
3 of compacted lightweight concrete.
Scaled down the mix mimics a classic "normal aggregate" 4:2:1 concrete mix , ie 48kg of Lytag® Lighteweight Concrete Aggregate (3 x 16kg packs) , 2 x 25kg Sharp Sand and 25kg Cement.
Moisture content is a critical factor in determining the final strength of concrete. For DIY or site mixed concrete absolute figures for the volume of added water can not be given as the moisture content of both fine (sand) and coarse (lightweight) aggregate needs to be known. Sufficient water needs to be added to hydrate the cement and make the mix workable. Additional water may be required compared to a "normal aggregate" concrete mix as the Lytag® will absorb moisture, however if the cement paste washes of the Lytag® aggregate the mix is probably too wet.
The above guide lines should produce a Lightweight Concrete which is up to 25% less dense than "normal concrete" with a compressive strength equivalent to at least LC 20:22
Source:
LYTAG
® lightweight concrete aggregate is manufactured in the UK from reclaimed power station fuel ash (PFA).
Lytag
® is made by pelletising and sintering pulverised fuel ash in a rotary kiln at a very high temperature. As it is fired, moisture in the pellets expands to produce a honeycombed core while the outside surface of each granule fuses to a ceramic shell. The resulting granules are lightweight, porous, and have a high resistance to crushing.
Environmental Considerations:
Lytag® is manufactured from former coal fired power station ash, hence allowing for land formerly used for landfill to be reinstated.
As Lytag is approximately 50% the weight of “normal”aggregate, twice the volume can be carried, reducing vehicle movements both on and off highway.
For a given volume, bound Lytag® Concretes and screeds use less cement, therefore providing a significant energy saving.
Particle Size:
Typically:
|
Sieve Size mm |
% Passing |
14 |
100% |
10 |
87% |
8.0 |
49% |
4.0 |
4% |
Physical Properties:
Typically: |
Moisture Content as delivered BS EN 1097-5:1999 |
15% |
Aggregate Crushing Strength (BS EN 13055) |
6.5 Nmm2 |
Bulk Density |
820kg/m3 |
Permeability BS1377:Pt5 1999 |
1.3x10-1 m/s |
Chemical Composition:
Principal components typically: |
SiO2 |
53% |
Al2O3 |
25% |
Fe2O3 |
6% |
CaO |
4% |
Los on Ignition |
3.1% |
Chloride |
0.01% |
Acid Soluable sulphate |
0.1% |
Specialist Aggregates' Price Promise:
All prices shown include UK VAT and delivery to 90% of UK locations -
Read More. - There are no hidden charges on checkout.
We export throughout Europe and Worldwide - please enquire for shipping rates.
Quick Contact:
Ring, Ring, why don't you give us a call?, Message or WhatsApp your enquiry and images to 07484 022898
Logistics:
This product option is supplied in a non returnable bulk bag on a pallet and stretch wrapped for additional protection and security.
Pallets are delivered by national couriers and off-loaded onto a level hard-standing using vehicle tail-lift and pallet truck. Please advise during checkout or contact our office if you have specific delivery requirements or concerns.
Specify: 4-14mm Lytag Concrete Aggregate from Specialist Aggregates.
Bulk Loads Available
Contact our sales office for pricing
T: 01889 580 660
E: Sales@specialistaggregates.com
Would A Sample Help?
Request a sample to view colour and form
or send us an enquiry
Request A Sample
or
Start An Enquiry
Order Online Now or Telephone Orders Welcome +44 (0)1889 580 660 - 9.00am to 5.00pm Monday / Friday